Cisco 600-502 Study Material, Prepare for the Cisco 600-502 PDF Dumps With Low Price

Welcome to download the newest Dumpsoon 70-411 VCE dumps: http://www.dumpsoon.com/70-411.html

Flydumps bring you the best Cisco 600-502 exam preparation materials which will make you pass in the first attempt.And we also provide you all the Cisco 600-502 exam updates as Microsoft announces a change in its Cisco 600-502 exam syllabus,we inform you about it without delay.

QUESTION 1
A stock brokerage firm requires that all trades are executed quickly with a minimal amount of delay due to network latency. Which software requirement is recommended as part of a business requirement?
A. The application shall process trades as soon as possible with no further delay.
B. The application should provide high-availability features to continue trading activities even in case of a software or hardware failure.
C. The application shall maintain the state of all active network links in real time and prioritize traffic flows that belong to trading activities on the links with lowest latency.
D. The application should set the latency attribute to zero on packets that belong to the a trading action.

Correct Answer: C
QUESTION 2
You must develop an SDN application that meets these specifications. The solution must manage devices through a centralized controller to configure access control lists. The solution will monitor traffic at a packet level to determine which packets are coming from known rogue applications and/or devices. Identified traffic will be used as the basis to create new ACLs to be deployed back onto the network devices. The identification and provisioning steps should take no more than 100 milliseconds. Which three design options must you consider to develop an SDN application that meets these specifications? (Choose three.)
A. choice of programming and scripting language
B. choice of service set
C. choice of transport protocol
D. choice of deployment model
E. use of security and TLS
F. hardware platforms involved

Correct Answer: ABD
QUESTION 3
Which programming language and Cisco onePK Service Set is required for an application that performs at the packet level?
A. Java with Utility Service Set
B. REST with Element Service Set
C. Ruby with Routing Service Set
D. Python with Routing Service Set
E. REST with Utility Service Set
F. C with Data Path Service Set
G. Java with Developer Service Set

Correct Answer: F
QUESTION 4
An application that leverages the Cisco onePK Data Path Service Set requires that TCP frames are inspected and discarded under a set of conditions. The sender is not informed of the discard. Which action does this scenario describe?
A. bypass or offload
B. DSCP marking
C. drop
D. purge
E. L4 redirect
Correct Answer: D QUESTION 5
You must document that before your application applies any configuration changes to a device, the application runs those changes through a set of predefined, automated consistency tests called “ACT-CHECK10”. The application applies changes only after the test has completed without any ERRORS or WARNINGS. Which statement about these requirements is true?
A. The system should test the configuration before applying it.
B. After applying the configuration changes the user should ping the device to ensure that everything still works.
C. The system should run consistency checks prior to applying configuration changes.
D. Prior to applying the configuration changes to the device, the system shall run consistency test ACT_CHECK10, and proceed to applying changes only if no errors and/or warnings are reported by the test.
E. The system should call the function app.ACT_CHECK10(“config-changes.txt”) method and capture the output. The system shall than go through the output to count the number of ERRORS and WARNINGS reported by the test. If the total number of ERRORS and WARNINGS is equal to 0, the system shall proceed to run app.ApplyChanges(“config-changes.txt”).

Correct Answer: D
QUESTION 6
When an application must be developed that interacts with Cisco IOS, NX-OS, and IOS-XR devices, the application must use LDAP for authentication and have secure communication between the Cisco onePK application and managed device. The customer prefers the use of Java for follow-on supportability by their staff. The customer is familiar with the Eclipse IDE. Which application dependency is relevant?
A. interaction with multiple device platforms Cisco IOS, NX-OS, and IOS-XR
B. use of LDAP for authentication
C. use of secure communication between onePK app and the device
D. choice of Java as programming language
E. customer’s familiarity with Eclipse IDE
Correct Answer: B
QUESTION 7
Which Cisco onePK API service provides path tracing capabilities?
A. Switching
B. Routing
C. Utility
D. Data Path
E. Developer
F. Discovery
Correct Answer: C
QUESTION 8
Exhibit: Refer to the exhibit. Which two statements are true based on this flowchart? (Choose two.)

A. All packets that are bound to host 10.10.0.1 are dropped.
B. Packet with source IP 3.3.3.110 and destination IP 10.10.0.1 are spanned.
C. All packets with source IP 3.3.3.110 and destination IP 10.10.0.1 are dropped.
D. All packets from host 3.3.3.220 destined to host 10.10.0.1 are dropped or spanned.
E. All traffic destined to host 10.10.0.1 is dropped or spanned.
F. OpenFlow v1.0 only supports “flows” that are defined based on MAC addresses, not IP addresses.

Correct Answer: CD
QUESTION 9
Which three options are requirements that should be supported by Software Defined Networking controllers? (Choose three.)
A. extraction of network element and topology information
B. computation of the explicit routing path per application flow.
C. ability to route application traffic based on policy
D. OSGI
E. Agile development principles
F. service-oriented architecture
Correct Answer: ABC
QUESTION 10
Which two protocols only keep track of the routers that are situated only one hop away? (Choose two.)
A. CDP
B. EIGRP
C. OSPF
D. ISIS
Correct Answer: AB QUESTION 11
Which language is compiled to native machine code?
A. C
B. Java
C. Python
D. Ruby

Correct Answer: A
QUESTION 12
Which statement describes what Cisco onePK SDK is used for?
A. It allows the application to communicate with an OpenDaylight controller.
B. It allows the application to communicate with network elements.
C. It allows the application to provide a REST API to a centralized controller.
D. It allows the application to talk to any network element that supports OpenFlow.

Correct Answer: B
QUESTION 13
Which two statements describe the two functionalities of an LLDP? (Choose two.)
A. LLDP is used to deliver label information in MPLS networks.
B. LLDP is used by OpenFlow controllers to find OpenFlow switches.
C. Cisco Discovery Protocol is Cisco’s L2/SNAP protocol that has similar functions as LLDP.
D. HSRP is the Cisco proprietary protocol that has similar functions as LLDP.

Correct Answer: BC
QUESTION 14
Which two options are purposes of the Plan phase SSD deliverable? (Choose two.)
A. defines successful criteria for the delivery of the business application
B. focuses on the sequence of flows to realize the business use case
C. combines CRD and SRD to monitor the end-to-end traceability of business requirements
D. defines the functional scope for the solution architecture
E. The System Services Document defines the functional scope and successful criteria for the delivery of the business.

Correct Answer: AD
QUESTION 15
Which three options are primary purposes of the Cisco software defined networking path computation element? (Choose three.)
A. discovering network infrastructure information
B. orchestration of network services
C. application-specific path routing computation
D. programming the network element for forwarding state
E. federating isolated virtualized domains
Correct Answer: ACD
QUESTION 16
Which three options are valid HTTP/1.1 methods? (Choose three.)
A. GET
B. PUT
C. POST
D. EXECUTE

Correct Answer: ABC
QUESTION 17
Which two options are common uses of DNS? (Choose two.)
A. looking up the IP address if the hostname is known
B. looking up the hostname if the IP address is known
C. looking up the TCP port number that is used by an application protocol
D. looking up the application level protocol that is used to connect to a server
Correct Answer: AB

Get yourself composed for Microsoft actual exam and upgrade your skills with Flydumps.com Cisco 600-502 practice test products. Once you have practiced through our assessment material, familiarity on Cisco 600-502 exam domains get a significant boost. Flydumps.com practice tests enable you to raise your performance level and assure the guaranteed success for Cisco 600-502 exam.

Dumpsoon 70-411 dumps with PDF + Premium VCE + VCE Simulator: http://www.dumpsoon.com/70-411.html